Erasers and other correcting equipment

Gommes

La qualité et le type de gomme sont essentielles pour d'excellents résultats de gommage. Toutes les gommes caoutchouc et la plupart des gommes produites par Faber-Castell sont sans latex. De la gomme scolaire à la gomme mie de pain, vous trouverez pour chaque travail la gomme adaptée.
58 produits
Filtres
Filtres actifs
Faber-Castell - Gomme mie de pain, gris
Gomme mie de pain, gris
CHF 1.90
Faber-Castell - Gomme mie de pain, jaune/rouge/bleu
Gomme mie de pain, jaune/rouge/bleu
CHF 1.90
Faber-Castell - Gomme Dust-free blanc
Gomme Dust-free blanc
CHF 1.40
Faber-Castell - Gomme Dust-free (1x)
Gomme Dust-free (1x)
CHF 1.90
Faber-Castell - Gomme Grip 2001 gris
Gomme Grip 2001 gris
CHF 2.60
Faber-Castell - Gomme Grip 2001 rouge/bleu
Gomme Grip 2001 rouge/bleu
CHF 2.60
Faber-Castell - Gomme Jumbo Grip 2001 grise
Gomme Jumbo Grip 2001 grise
CHF 2.90
Faber-Castell - Gomme sans PVC avec fourreau
Gomme sans PVC avec fourreau
CHF 1.00
Faber-Castell - Gomme plastique 7081N
Gomme plastique 7081N
CHF 1.40
  • 1
  • 2
  • 3
  • 4
  • 5
  • >
  • >>
  • 1
  • 2
  • 3
  • >
  • >>
  • 1
  • >
  • >>

General information on Faber-Castell erasers and correct use

History of the eraser

When erasing large areas of graphite, particularly with writing or stroke areas running over several lines, the eraser can often start to 'smudge'. This is because the user tries to erase too quickly and the parts of the eraser have to absorb too much graphite. The eraser can only carry out its task if the movements create a balanced ratio between graphite-free areas and areas containing graphite. The eraser can not become "overloaded"! Erasing parallel to the stroke: Area becomes dirty, erasing is slowed down unnecessarily! Erasing at an angle to the stroke: Erasing the area bit by bit clears the area quickly and effectively!

Erasing correctly

When erasing large areas of graphite, particularly with writing or stroke areas running over several lines, the eraser can often start to 'smudge'. This is because the user tries to erase too quickly and the eraser bits have to absorb too much graphite. The eraser can only carry out its task if the movements create a balanced ratio between graphite-free areas and areas containing graphite. The eraser cannot become "overloaded"! Erasing parallel to the stroke: Area becomes dirty, erasing is slowed down unnecessarily! Erasing at an angle to the stroke: Erasing the area bit by bit clears the area quickly and effectively!